Maximum nitrogen removal in the step-feed activated sludge process.

This paper presents a mathematical framework that can be used to determine the flow distributions for a step-feed activated sludge process that result in maximum nitrogen removal. The model indicates that nitrogen removal efficiency in a step-feed activated sludge process is highly dependent on the ultimate biochemical oxygen demand (BOD(L))-to-total Kjeldahl nitrogen (TKN) ratio of the wastewater. For typical domestic wastewater, which has a relatively high BOD(L)-to-TKN ratio, the step-feed process will outperform the Modified Ludzack-Ettinger process for nitrogen removal, when the flow to each step is optimally distributed. Using plant-specific water quality data and operating conditions from a 1-year period, nitrogen removal performance for four step-feed activated sludge plants operated by the Sanitation Districts of Los Angeles County (California) was calculated using the developed model. The calculated nitrogen removal efficiencies match well with the actual plant performance data. These results validate the model as a useful tool for predicting nitrogen removal in a step-feed activated sludge process. Other analyses revealed that improvements in nitrogen removal at existing facilities are achievable by adjusting the split of primary effluent flow to each anoxic zone several times during the day. The timing of the adjustments and the optimal flow splits can be determined from data on diurnal fluctuations in BOD(L) and TKN concentrations. An example is provided to illustrate the application of such an operating strategy and the potential enhancement of nitrogen removal.     

Quantification of the dissolved organic matter effect on the sorption of hydrophobic organic pollutant: application of an overall mechanistic sorption model

This study presents an overall sorption model to estimate the sorption equilibrium coefficients of hydrophobic organic pollutants for heterogeneous aquatic systems. This proposed model combines a series of sorption equilibrium relationships including the adsorption of dissolved organic matters on particulates, the binding between organic pollutants and dissolved organic matters, and the sorption of organic pollutants on particulates with or without the presence of dissolved organic matters. By using this model, variations among the sorption equilibrium coefficients with the concentrations of dissolved organic matters are obtained. Also discussed herein are case studies involving pollutants having a wide spectrum of K(ow)s, different types of dissolved organic matters, different pH values and ionic strengths. In most of the case studies, the sorption equilibrium coefficients initially increase with the-concentrations of dissolved organic matters and, then, decrease after reaching a maximum value. This study also addresses the relative errors of partition coefficients attributed to the negligence of the effect caused by the dissolved organic matter, the so-called third-phase effect.     

Mechanical Properties and Isothermal Crystallization Behaviour of Poly(lactide)/Poly(methyl methacrylate)/α-Cellulose Composites

Polylactide (PLA)/polymethylmethacrylate (PMMA)/α-cellulose composites were fabricated using a twin-screw extruder. During fabrication, α-cellulose short fibres were incorporated for improving the toughness of the brittle PLA and a chain extender was used for reducing PLA hydrolysis. Highly transparent PLA and PMMA were blended to obtain miscible and transparent blends. For evaluating the performance of the PLA/PMMA/α-cellulose composites, a series of measurements, including tensile and Izod impact tests, light transmission and haze measurements, thermomechanical analysis, and determination of isothermal crystallisation behaviour, was conducted. Adding the chain extender considerably reduced the occurrence of hydrolytic degradation. Both the chain extender and α-cellulose short fibres increased the elongation at break and Izod impact strength of the composites. Compared with the neat PLA, including 1.0 wt% α-cellulose short fibres increased the elongation at break and Izod impact strength of the composite PLA by approximately 211 and 219 %, respectively. According to the observed mechanical performance, the optimal blending ratios for PLA and PMMA were between 90:10 and 80:20. The total light transmittance of the composites was as high as 91 %, indicating that the PLA/PMMA blend was highly miscible. The haze value of the PLA/PMMA/α-cellulose composites was lower than 32 %. Incorporating cellulose short fibres increased the number of crystallisation sites and crystallinity of the PLA/PMMA/α-cellulose composites while reducing the spherulite dimensions.     

A pilot study for determining the optimal operation condition for simultaneously controlling the emissions of PCDD/Fs and PAHs from the iron ore sintering process

In this study, the cost-benefit analysis technique was developed and incorporated into the Taguchi experimental design to determine the optimal operation combination for the purpose of providing a technique solution for controlling both emissions of PCDD/Fs and PAHs, and increasing both the sinter productivity (SP) and sinter strength (SS) simultaneously. Four operating parameters, including the water content, suction pressure, bed height, and type of hearth layer, were selected and all experimental campaigns were conducted on a pilot-scale sinter pot to simulate various sintering operating conditions of a real-scale sinter plant. The resultant optimal combination could reduce the total carcinogenic emissions arising from both emissions of PCDD/Fs and PAHs by 49.8%, and increase the sinter benefit associated with the increase in both SP and SS by 10.1%, as in comparison with the operation condition currently used in the real plant. The ANOVA results indicate that the suction pressure was the most dominant parameter in determining the optimal operation combination. The above result was theoretically plausible since the higher suction pressure provided more oxygen contents leading to the decrease in both PCDD/F and PAH emissions. But it should be noted that the results obtained from the present study were based on pilot scale experiments, conducting confirmation tests in a real scale plant are still necessary in the future.     

Concentration and composition variations of metals in the outdoor PM10 of elementary schools during river dust episodes

Aeolian river dust can seriously affect the air quality in central Taiwan. The main purpose of this study was to assess the concentration variations of PM₁₀ and metals at different elementary schools during river dust episodes. River dust samples were taken from eight sites in the main bare soil areas of the Choshui River. PM₁₀ aerosols from four elementary schools in Yulin County were collected by means of high-volume samplers. Fifteen elements (Fe, Al, Ca, Mg, Mn, Zn, Ti, Ni, V, Cr, As, Pb, Cu, Co, and Cd) in the river dust and PM₁₀ were analyzed in this study. The coefficients of divergence (CDs) were obtained by comparing the metal compositions in PM₁₀ aerosols at the four schools on the sampling days with the mean metal contents in the river soil samples as reference. The CD values showed that metal compositions in the aerosols at high-exposure sites during river dust episodes were similar to those compositions in the river dust. The concentrations of PM₁₀ at the high-exposure schools during river dust episodes were much higher than those during non-river-dust episodes. This study also indicated that at the high-exposure sites, both the PM₁₀ and metal concentrations were higher than at the low-exposure and control sites, not only during the river dust episodes, but also after the river dust episodes. The concentrations of toxic metals (Ni, Cr, As, and Cd) at the high-exposure sites were about 11.3 times higher during the river dust episodes (189 ng/m³) than during non-river-dust episodes (16.7 ng/m³) and about 8.9 times higher during the same periods at the control site (21.3 ng/m³).     

Photocatalytic oxidation of xenobiotics in water with immobilized TIO2 on agitator

Abstract

A novel photocatalytic oxidation reactor, using Degussa P‐25 T_iO₂ as a stationary phase with a thickness of 1.5–2.0 um on the blades of agitator, was developed to study the photocatalytic oxidation of xenobiotics. Particularly in this device, separation of photocatalyst from the purified water after oxidation reaction was not necessary, and no other aeration equipment was required to supply oxygen. To examine the efficiency of this device, photocatalytic degradation of xenobiotic organics such as carbofuran was studied as an example. Results indicated that carbofuran could be degraded completely with mineralization efficiency of 20 % after 6 hours of oxidation under the imposed conditions. The mineralization rate of carbofuran was found to follow the pseudo‐first order reaction kinetics. Moreover, the rate constant of mineralization was found to be proportional to T_iO₂ film area and the square root of UV light intensity. These results implied the mineralization efficiency of carbofuran could be improved through increasing T_iO₂ film area and UV light intensity. Accordingly, this novel device showed potential application for degrading xenobiotics in water.     

Effect of Biaxial Stretching on Thermal Properties, Shrinkage and Mechanical Properties of Poly (Lactic Acid) Films

This study produced poly (lactic acid) sheets using a biaxial stretching process, to investigate the effects of biaxial stretching on thermal properties, crystallinity, shrinkage and mechanical properties of PLA films. The results of differential scanning calorimetry show that the glass temperature peak of PLA films, which weakened after stretching. The cold crystallization peak of PLA films nearly disappeared at stretch ratios of 4 × 4 with a stretching rate above 50 %/s. The orientation and strain crystallization of PLA films were suppressed at stretching temperatures of approximately 100–110 °C. The shrinkage of PLA decreased proportionally to the stretch rate and inversely proportional to the stretching temperature, suggesting that the internal stresses frozen in the amorphous phase were an indication of a decrease in the crystallinity of the films, implying that PLA films would be best suited to low-shrinkage applications. The stress–strain of the PLA films increased considerably following the biaxial stretching process. In addition, PLA films exposed to hot water treatment show a slight decrease in stress values, probably attributable to a relaxation of the molecules, which have undergone orientation but failed to crystallize.     

Removal of pesticides from rinsate by adsorption using agricultural residuals as medium

Abstract

The feasibility of using agricultural residual with highly organic matter content ‐ spent mushroom compost (SMC) as adsorption medium for removal of pesticides including carbaryl, carbofuran, and aldicarb with a concentration range of 0–30 mg/L from rinsate was investigated. Bottle‐point method was used to determine adsorption isotherms for single‐pesticide and multi‐pesticides. It was found that SMC might potentially be used for on‐farm treatment of pesticide rinsate. The adsorption capacity of SMC was increased compared to most soils, possibly related to the increased organic matter content. The rapid equilibrium of pesticide solution and SMC was consistent with a physical type of adsorption mechanism. The adsorption of carbamate pesticides on SMC was found to exhibit nonlinear “favorable”; adsorption behavior that could be characterized well by the Freundlich isotherm model. In addition, the multi‐pesticide adsorption tests displayed the characteristics of competitive behavior. The competitive ability of these three pesticides in multi‐components adsorption was in the order carbaryl > carbofuran > aldicarb, which was consistent with the adsorbability of pesticides.     

Agricultural pesticide residues in farm ditches of the Lower Fraser Valley, British Columbia, Canada

Transient and permanent farm ditches flowing to the Lower Fraser River tributary fish streams of British Columbia, Canada, were sampled at several locations in 2003-2004 to determine the occurrence and concentration of residues of selected pesticides, their transformation products, and soluble/extractable Cu++ ions. Of the 43 compounds analyzed, 28 and 22 pesticides were detected in transient farm ditch water and sediments, respectively. About 34% fewer pesticides, however, were found in both matrices of permanent farm ditches. Average concentrations (microg L(-1)) of those most frequently detected in permanent farm ditch water were atrazine (0.20), alpha -chlordane (0.06), desethylatrazine (0.13), diazinon (0.55), dieldrin (0.28), endosulfan sulfate (0.16), glyphosate (6), metalaxyl (0.27); and soluble Cu++ ions (25). Those most often found in ditch sediments (microg kg(-1)) were aminomethylphosphonic acid (AMPA) (2,300), 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)ethane (DDT) (250), endosulfan sulfate (500), glyphosate (1,225); and extractable Cu++ ions (58,000). The risk potential of these pesticide residues to non-target aquatic organisms inhabiting Fraser River tributary fish streams contiguous to permanent farm ditches is evaluated and discussed.